- General

This Is How To Maintain Your Metal Roof

One alternative to roofing is to use metal roof tiles. This type of tile is known to be very durable, but due to strong wind damage, rust, or the expansion and shrinkage factors of the metal, sometimes the tile needs repair. Before you do the repair yourself, you need to make sure that your roof is still under warranty (if there is a warranty period clause before). If there really is try to check whether the warranty period is still valid. It’s pretty good so you can save money and energy if it turns out there is still a warranty for your roof. If it turns out there really is no guarantee or the time is up, there’s no need to worry. Additionally, if your metal roof is dirty and you want to clean it thoroughly, then we recommend you to call the best shingle washing service in town at https://goo.gl/maps/ahtdRS8aVV2nF69E9.

Damage to the roof cover there are levels ranging from mild to severe. If the number of broken tiles is pretty much the only way you can replace the entire roof. However, you need to remember to do this yourself unless you are really good at installing roof types. The best step you can take is to call in an experienced metal roofing specialist.

If the damage is in the light category below are the steps you can do:

1. Observe if there are loose nails. If there is pull it out and install it with a new one.

2. Look for parts that have holes, rust, or other signs of damage. If you find, remove rust with a wire brush. Next coat the surface with a metal base paint, then paint the same color as the roof.

3. Cover the area that is leaking using putty or a leak-proof coating.

4. If necessary, examine parts by section and coat with leak-proof paint evenly.

5. Replace the broken tile. If you have difficulty please call an experienced roofing expert.

Dave Brittgildow

About Dave Brittgildow

Read All Posts By Dave Brittgildow

Leave a Reply

Your email address will not be published. Required fields are marked *